Best Drill Bit For Perspex: Top Picks & Drilling Tips

This TITGGI 10-piece set uses industrial carbide tips to penetrate hard surfaces like tile and brick. The bits span 1/8″ to 1/2″ and handle glass and some plastics with steady, slow drilling. I like them when I need robust tips without frequent re-sharpening. Use low speed and cooling when drilling perspex to avoid melting.
For perspex work, the bits cut clean when slowed and cooled. They are built for tough jobs, so they can be overkill for thin acrylic. Still, this set is a durable option if you mix materials and need a versatile kit for perspex and masonry.

This 10-piece diamond hole saw set cuts through glass and dense material. I use diamond bits for smooth edge holes and for drilling fragile materials. They stay cool with water and make controlled holes in perspex if you clamp and cool. Run at low RPM and use plenty of water to protect acrylic.
For perspex projects, the set is best when you need large, clean holes and avoid heat build-up. Diamond cups shine on brittle substrates. They do require patient drilling and cooling to be the best drill bit for perspex for larger diameter holes.

COMOWARE delivers a 16-piece titanium-coated HSS twist set with hex shanks for quick change. The small sizes 1/16″ to 1/4″ work well for precision perspex holes. I favor titanium-coated HSS for low friction and long life. Use slow speed and light pressure when drilling acrylic to avoid melting and chipping.
These bits are a top pick when you need many small sizes for perspex panels. The hex shank fits drivers and quick-change chucks. For many perspex tasks, this set often acts like the best drill bit for perspex in my box of bits.

This 10-piece tungsten alloy tip set aims at tile, concrete, and glass. The triangle handle case helps size selection on the fly. I use these for tough surfaces, and I slow drills heavily when I reach perspex. The tips cut with strength but need careful feed on acrylic.
For perspex, the set will work in a pinch if you control speed and cooling. It is not the ideal single solution but serves builders who mix heavy masonry and occasional acrylic. With care, these bits can be used for perspex without cracking.

toolant’s 10-piece diamond set aims at tile, ceramic, and glass and includes cooling wax. The bits work best wet and deliver precise cuts. I’ve used similar diamond bits on perspex when clamped and cooled; results are clean but slow. Keep RPM low to avoid melting acrylic.
For perspex drilling, these bits are a specialty tool for clean edges when cutting holes larger than small twist sizes. They can act as the best drill bit for perspex for wet, controlled cuts, especially in larger diameters that require smooth edges.

This 6-piece diamond set targets porcelain, ceramic, and glass drilling and includes cooling wax. I use smaller diamond cups for delicate work and they can make clean holes in perspex with slow, cooled drilling. They are compact and easy to store. Use a clamp and consistent water feed to protect acrylic from heat.
For perspex, this set is ideal when you need precise holes with minimal chipping. It can be the best drill bit for perspex for specialty cuts, but it is slower than twist bits for many small holes.

Glass Mechanix offers 10 round carbide bits designed for windshield chip repair and glass work. They are built for durability and precise chip grinding. I use these for fine glass work and occasionally for perspex with extreme care at low RPM and water cooling. Their life span is long when used within intended purpose.
For perspex, they are niche tools. They can create small, precise spots when clamped and cooled. They are not classic plastic-specific bits but can be used when other bits aren’t available, making them an option for careful acrylic repairs.

YLYL’s 12-piece kit covers 4 mm to 30 mm diameters with diamond grit for stone, tile, and glass. I use these for larger, clean holes and they can be adapted for perspex with water cooling and a steady feed. The large size range handles many applications and gives smooth edges when used carefully.
For perspex, the YLYL kit is handy for drilling pot and bottle style holes. It can act as the best drill bit for perspex when you need larger, finished holes, but expect slow, wet cutting and careful clamping to prevent acrylic damage.

This 10-piece diamond bit set covers a practical range for bottles, tiles, and ceramics. I depend on diamond bits when I need a smooth finish and minimal chipping. On perspex, these bits perform well when used wet and at low speed. Clamp sheets and apply coolant for best results.
For perspex users, this set becomes a specialist tool for neat holes with finished edges. It can be the best drill bit for perspex for visible cuts, but expect to use a drill press and coolant to avoid melting or chatter in acrylic.

These 8 titanium-coated serrated HSS bits are made for aggressive cutting in wood, metal, and plastics. The serrated side cuts reduce chatter and can pull chips away from the hole. I use them for thicker acrylic where chip ejection matters. Run slow and steady and you’ll get clean perspex holes without melt.
They are versatile for many materials and resist wear. For perspex projects, they can act as the best drill bit for perspex when you need fast chip removal and stable drilling. Clamp and cool for best results on acrylic.